Jeep Renegade Bolt Pattern: Wheel Size, & Lug Nut Specs
Are you a proud Jeep Renegade owner looking to upgrade your wheels or tires? Trying to figure out the Renegade’s bolt pattern, wheel size, and other important specs for new wheels can be confusing. This in-depth guide will explain everything you need to know about the Jeep Renegade’s bolt pattern, wheel dimensions, lug nuts, and more to make your wheel purchase a painless process.
Table of Contents
What Exactly is Bolt Pattern?
Before we dive into the Renegade’s specifics, let’s review what bolt pattern means. Bolt pattern, also known as lug pattern or pitch circle diameter (PCD), refers to the diameter of the circle that the centers of the wheel lugs make when bolted to the vehicle.
This imaginary circle formed by the centers of the wheel lugs is crucial – it determines the fitment of your wheels. The bolt pattern must match between your Jeep’s hub and any aftermarket wheels for proper mounting.
Some key facts about bolt patterns:
- The bolt pattern is measured in millimeters (mm) or inches.
- It consists of two numbers – the number of bolt lugs and the diameter of the bolt circle.
- For example: 5×110 means 5 lug bolts arranged in a circle with a diameter of 110mm.
- The specific bolt pattern number is usually stamped on the back of factory wheels.
Knowing your Jeep Renegade’s bolt pattern is necessary when shopping for new wheels or lug nuts to guarantee everything fits correctly. Now let’s look at the Renegade’s specifics.
What is the Jeep Renegade’s Bolt Pattern from the Factory?
All Jeep Renegade models, including the Trailhawk and Latitude trims, come equipped with a 5×110 bolt pattern from the factory.
This means that every stock Jeep Renegade – across all model years – has the same 5×110 wheel lug pattern.
Some key facts about the Jeep Renegade’s 5×110 bolt pattern:
- Arrangement: 5 lug bolts
- Pitch circle diameter: 110mm
- Bolt circle: 110mm
- Lug size: M12 x 1.5 thread
This information should be stamped on the backside of your factory Renegade wheels. If you’re unsure, you can count the bolts or measure the diameter across the mounting holes.
Do Any Renegade Models Have Different Bolt Patterns?
Nope! All Jeep Renegade models leave the factory equipped with the same 5×110 bolt pattern.
This consistency makes shopping for aftermarket wheels and tires simple – any wheel made for the Renegade will fit regardless of trim level or model year. No need to worry about variances between the Sport, Latitude, Trailhawk or other trims.
The only time a Renegade could have a different bolt pattern is if someone has installed wheel adapters to fit a different lug pattern. We’ll come back to adapters later on.
But in stock form, every Jeep Renegade uses a 5×110 lug pattern – it’s consistent across the lineup.
What is the Standard Jeep Renegade Wheel Size?
While the Renegade’s 5×110 bolt pattern stays consistent, the wheel diameter does vary between models:
- 16-inch wheels are standard on Sport and Latitude trims
- 17-inch wheels come equipped on the Limited and Trailhawk models
The stock wheel size for the Jeep Renegade ranges from 16-inches to 18-inches in diameter. Pay close attention to the wheel diameter when shopping for new tires or wheels to get proper fitment.
For example, buying 17-inch or larger wheels for a base Sport model with 16-inch wheels stock will require low profile tires to avoid rubbing.
Jeep Renegade Wheel Offset Range
Wheel offset is an important measurement that impacts wheel fitment. Offset refers to the distance from the wheel’s center line to the mounting surface that contacts the hub.
Stock Jeep Renegade wheels have offsets ranging between 40mm and 45mm. When shopping for aftermarket wheels, offset can range from 35mm to 50mm.
Lower offsets around 35mm will push the wheels outward for a more aggressive stance. Higher offsets around 50mm will tuck the wheels in closer to the fender wells. Most owners choose an offset in the stock 40-45mm range.
What is the Jeep Renegade’s Center Bore Size?
The center bore is the diameter of the hub opening on the wheel that fits over the hub or rotor.
Jeep Renegade wheels have a center bore ranging between 57.1mm on smaller wheels up to 66.6mm on larger wheels. Matching the center bore is crucial when buying aftermarket wheels – an improper center bore is a common fitment issue.
Many wheels use a larger center bore to fit multiple vehicles. In that case, always use hub centric rings to take up any slop between the wheel and hub. This prevents vibration from uneven contact.
Jeep Renegade Lug Nut Size and Torque
The lug nut holds your wheels securely to the Renegade’s hub using the bolt pattern. Jeep uses M12 x 1.5 lug nuts with a 12mm diameter and 1.5mm thread pitch.
When installing new wheels, make sure any aftermarket lug nuts match this thread spec. Incorrect lug nuts can damage the wheel bolts or come loose.
It’s also crucial to torque the Renegade’s lug nuts to the factory spec of 89 lb-ft. Always tighten the nuts in a star pattern to ensure even contact. Retorque after the first 25 miles of driving and anytime you rotate the tires.
Proper lug nut torque ensures the wheels stay firmly attached for safety and prevents damage to the mounting studs. Don’t skip this step after swapping new wheels.
Tips for Fitting Larger Aftermarket Wheels on the Jeep Renegade
Want to upgrade to larger diameter wheels like 18″ or even 20″ on your Renegade? Here are some tips for getting proper fitment with plus-sized wheels:
- Stick with wheels that have the proper 5×110 bolt pattern to match your Renegade.
- Pay close attention to offset and center bore specs.
- You may need a lower offset around 35mm to clear brake calipers when upsizing more than 1.
- Always use hubcentric rings with larger center bore wheels to eliminate vibration.
- Consider adjustable ball joint extensions to add more clearance for scrub.
It is definitely possible to run larger 18″ or 20″ diameter wheels on a Renegade with care taken during wheel selection. Don’t be afraid to ask for help from an expert to ensure proper fit.
Is It Possible to Change the Bolt Pattern on a Jeep Renegade?
What if you find a set of wheels you love in the wrong bolt pattern? Is there a way to change or convert the bolt pattern on a Jeep Renegade?
The good news is yes, you can change the Renegade’s bolt pattern using adaptors.
Wheel adapters fit in between the vehicle’s hub and the wheels to alter the effective bolt pattern. Common reasons to use adapters:
- Fitting wheels from another vehicle, like a 5×114.3 or 5×120.65 pattern
- Switching to aftermarket wheels with a different lug pattern
- Converting to a different lug count like 5,6, or 8 lug
There are two main types of wheel adapters:
Lug-centric: The wheels bolt to the adapter, which has studs that mount to your Renegade’s hub. Less stable, only recommended for mild use.
Hub-centric: The wheels mount directly to the hub using the Renegade’s studs. The adapter acts as a spacer. More stable for street or off-road use.
In general, a hub-centric wheel adapter is recommended for proper fitment and safety on a Jeep Renegade. This aligns the wheels directly to the hub for a solid connection. Adapters allow nearly any bolt pattern swap if you find the perfect wheels.
Where to Shop for Aftermarket Jeep Renegade Wheels?
Now that you know the Renegade’s bolt pattern, wheel size, and other specs, where are the best places to shop for compatible aftermarket wheels? Here are some recommendations:
- TireRack.com – Large selection of wheels that fit the Renegade’s bolt pattern
- DiscountTireDirect – Shop by wheel diameter and filter by bolt pattern
- JeepRenegadeForum – Used take-off wheels from other Renegade owners
- eBay – Search by the Renegade and 5×110 bolt pattern
- Amazon – Prime eligible wheels that fit the Renegade
The key is filtering or searching by your Renegade’s specifications – the 5×110 bolt pattern being most crucial. This ensures fitment without surprises.
Always double check the center bore, wheel diameter, offset and lug size before purchasing wheels. This guarantees a smooth installation right from the box.
Frequently Asked Questions About Jeep Renegade Wheels
Here are answers to some common questions about Jeep Renegade wheels and bolt patterns:
What is the proper lug torque for Renegade wheels?
The factory spec is 89 lb-ft. Use a torque wrench and tighten in a star pattern for proper seating.
What’s the largest tire size I can fit on my stock Renegade?
You can fit up to a 32″ tire on a stock Renegade with minor modifications like a small suspension lift.
Can I use 16″ or 17″ wheels from a Jeep Wrangler?
Yes, if they are 5×110 bolt pattern they will directly bolt on to the Renegade.
Where can I buy used OEM take-off Renegade wheels?
Check Craigslist, Jeep forums, or even call local dealers to find used OEM wheels. Great way to save money.
What size wheel spacers should I use to fit bigger tires?
25-35mm hub-centric spacers are commonly used to clear 33” or larger tires on lifted Renegades.
The Bottom Line
Understanding the key specifications of your Jeep Renegade like the 5×110 bolt pattern, wheel diameter, and offset are crucial for proper fitment when buying new wheels or tires.
Be sure to use the correct lug nut size and torque when swapping on aftermarket wheels. With the right wheels fitted properly, a Jeep Renegade can handle off-road adventures while looking great.
Now get out there, find your perfect set of wheels, and bolt them up the right way using this guide. Your Jeep will be riding in style in no time!
