The 2019 Jeep Compass oil reset is an important maintenance task that should be performed regularly to ensure the longevity and optimal performance of your vehicle. The oil reset procedure is necessary to clear the oil change indicator system and to ensure that the vehicle’s computer is aware of the new oil change. Failure to perform this procedure can result in inaccurate oil change interval reminders, which can lead to engine damage and decreased fuel efficiency.
Performing the 2019 Jeep Compass oil reset is a simple process that can be done in a matter of minutes. There are several methods to reset the oil change indicator system, including using the vehicle’s dashboard controls, turning the ignition on and off, and fully depressing the accelerator pedal. However, it is important to follow the specific instructions for your particular vehicle model and year to ensure that the oil reset is done correctly.
Regular oil changes and proper oil reset procedures are essential for maintaining the health of your Jeep Compass and ensuring that it runs smoothly for years to come. By following the recommended oil change intervals and performing the oil reset procedure as needed, you can keep your vehicle in top condition and avoid costly repairs down the road.
Table of Contents
Understanding Your 2019 Jeep Compass
The 2019 Jeep Compass is a compact SUV that comes with a range of features designed to make driving more comfortable and convenient. Understanding the various functions and systems of your Jeep Compass is important to ensure that you get the most out of your vehicle. This section provides an overview of the instrument panel and the oil life system of the 2019 Jeep Compass.
The instrument panel of the 2019 Jeep Compass is designed to provide you with important information about your vehicle’s performance and status. The panel includes a range of gauges and warning lights that help you monitor your vehicle’s systems. Here are some of the key features of the instrument panel:
- Speedometer: Displays your vehicle’s speed in miles per hour (mph).
- Tachometer: Displays your engine’s revolutions per minute (rpm).
- Fuel Gauge: Indicates the amount of fuel in your vehicle’s gas tank.
- Temperature Gauge: Shows the temperature of your engine’s coolant.
- Warning Lights: These lights illuminate when there is an issue with your vehicle’s systems, such as the oil pressure, battery, or check engine light.
Oil Life System
The oil life system of the 2019 Jeep Compass is designed to help you keep track of when your vehicle needs an oil change. This system calculates the remaining oil life based on your driving habits and other factors, and displays a message on the instrument panel when it’s time for an oil change. Here are some key points to keep in mind about the oil life system:
- The oil life system is designed to optimize the performance and longevity of your vehicle’s engine.
- The system calculates the remaining oil life based on factors such as engine temperature, driving speed, and time elapsed since the last oil change.
- When the oil life reaches a certain point, a message will appear on the instrument panel indicating that an oil change is due.
- It’s important to follow the recommended oil change intervals to ensure that your vehicle continues to perform at its best.
In summary, understanding the instrument panel and oil life system of your 2019 Jeep Compass is essential to keeping your vehicle running smoothly and efficiently. By paying attention to the gauges and warning lights on the instrument panel, and following the recommendations of the oil life system, you can help ensure that your Jeep Compass remains in top condition for years to come.
Steps to Reset Oil Indicator
Before resetting the oil indicator on a 2019 Jeep Compass, it is important to ensure that the engine is turned off and that the gear is set to the PARK position. Also, make sure to close all doors before starting the procedure.
To reset the oil indicator, follow these simple steps:
- Turn the ignition to the RUN position, but do not start the engine.
- Fully depress the accelerator pedal slowly three times within 10 seconds.
- Turn off the ignition.
- Start the engine to verify that the service reminder has been reset.
Alternatively, you can reset the oil indicator via the instrument cluster. Some forums suggest pressing the “Mileage” button to reset the oil change indicator. However, the following procedure is recommended:
- Shift into Park.
- Put your Jeep into the ON/RUN position.
- Press the gas pedal three times.
- Verify if the reset was successful.
It is important to note that resetting the oil indicator does not replace the need for regular oil changes. Jeep recommends changing the oil every 7,500 miles or six months, whichever comes first. Regular oil changes help ensure the longevity and performance of the engine.
In summary, resetting the oil indicator on a 2019 Jeep Compass is a quick and easy process that can be done in just a few simple steps. By following these steps, Jeep owners can ensure that their vehicle is running at its best and that they are getting the most out of their investment.
Troubleshooting Common Issues
If the oil change indicator on the Jeep Compass is not reset successfully, it may indicate that there is an issue with the system. In such cases, the following steps may help:
- Verify that the engine is off when resetting the oil change indicator.
- Ensure that the accelerator pedal is depressed three times within 10 seconds.
- Check that the ignition is turned off and then on again after resetting the indicator.
- Try resetting the oil change indicator using the instrument cluster instead of the gas pedal.
If none of the above steps work, it may be necessary to consult a professional mechanic or the Jeep dealership for further assistance.
Sometimes, the oil change indicator may not reset due to system errors. In such cases, the following steps may help:
- Verify that the vehicle’s battery is functioning properly.
- Check that the oil level is not too low or too high.
- Inspect the oil filter for any damage or clogging.
- Ensure that the correct oil viscosity and grade are being used.
If the above steps do not resolve the issue, it may be necessary to take the Jeep Compass to a professional mechanic or the dealership for further diagnosis and repair.
It is important to note that attempting to reset the oil change indicator without addressing any underlying issues may lead to further damage to the vehicle and compromise safety. Therefore, it is recommended to seek professional assistance if the issue persists.
Oil Change Frequency
Regular oil changes are essential to maintain the health of your 2019 Jeep Compass. The recommended oil change frequency is every 7,500 miles or six months, whichever comes first. However, if you frequently drive in harsh conditions such as extreme temperatures, dusty or sandy areas, or stop-and-go traffic, you may need to change your oil more frequently.
To determine if your oil needs changing, check the oil level and quality regularly. If the oil level is low or the oil appears dirty or gritty, it’s time for a change. Neglecting to change the oil can lead to engine damage and reduced performance.
Choosing the Right Oil
When choosing oil for your 2019 Jeep Compass, it’s important to use the right type and viscosity. The recommended oil type is API certified, and the recommended viscosity is 0W-20. Using the wrong type or viscosity of oil can lead to engine damage and reduced performance.
Additionally, consider using synthetic oil for better performance and protection. Synthetic oil is more expensive than conventional oil, but it lasts longer and provides better protection against wear and tear.
To ensure you are using the right oil, consult your owner’s manual or speak with a certified mechanic. They can recommend the best oil for your specific driving conditions and habits.
Overall, following these maintenance tips can help ensure the longevity and performance of your 2019 Jeep Compass.
Resetting the oil change light on a 2019 Jeep Compass is a simple process that can be done in just a few steps. By using the engine start/stop button and cycling the ignition to the On/Run position, pressing the accelerator pedal three times, slowly, and then cycling the ignition back to the Off/Lock position, the oil change light can be reset.
It is important to note that the oil change light is not a check engine light, but rather a reminder to remind owners to change their oil. It is recommended to follow the manufacturer’s guidelines for oil changes, which can be found in the owner’s manual.
Regular oil changes are important for the health and longevity of a vehicle’s engine. By changing the oil at regular intervals, the engine is kept clean and lubricated, which can prevent costly repairs down the line.
Overall, resetting the oil change light on a 2019 Jeep Compass is a quick and easy process that can be done by following the steps outlined in this article. By staying on top of oil changes, owners can ensure the health and longevity of their vehicle’s engine.