The 2017 Jeep Renegade is a popular subcompact SUV that comes with a key fob for easy access and starting. However, like any other battery-powered device, the key fob battery can run out of juice. When this happens, it can be frustrating, especially if you’re not sure how to replace the battery.
Fortunately, replacing the key fob battery on a 2017 Jeep Renegade is a simple process that can be done in a matter of minutes. There are several resources online that provide step-by-step instructions and videos that guide you through the process. Additionally, replacement batteries are widely available and can be purchased at most automotive stores or online retailers. So, if you’re experiencing issues with your key fob, don’t worry, it’s an easy fix.
Table of Contents
2017 Jeep Renegade Key Fob Overview
The 2017 Jeep Renegade comes with a keyless entry system that uses a key fob to unlock and lock the car doors. The key fob also has a push-button start system that allows the driver to start the engine without inserting a key into the ignition.
The key fob has a small battery that powers its functions. When the battery is low, the key fob may not work properly, and the driver may experience difficulty in unlocking or locking the car doors or starting the engine.
To replace the battery, the driver needs to open the key fob and remove the old battery. The battery type used in the 2017 Jeep Renegade key fob is a CR2032 coin battery. It is readily available in most stores that sell batteries.
It is important to replace the battery with the same type of battery to ensure that the key fob works properly. Using a different type of battery may damage the key fob or cause it to malfunction.
In addition to unlocking and locking the car doors and starting the engine, the 2017 Jeep Renegade key fob has some programmable options. These options allow the driver to customize the key fob functions to suit their preferences.
For example, the driver can program the key fob to unlock only the driver’s door or all the doors when the unlock button is pressed. The driver can also program the key fob to sound the horn or flash the lights when the lock or unlock button is pressed.
Overall, the 2017 Jeep Renegade key fob is a convenient and useful tool that enhances the driving experience. With proper care and maintenance, the key fob can provide reliable service for many years.
The 2017 Jeep Renegade key fob requires a CR2032 coin battery. This type of battery is commonly used in electronic devices such as remote controls, calculators, and watches.
The CR2032 battery is a lithium coin cell battery that provides a long-lasting power source for the key fob. It has a voltage of 3 volts and is mercury-free, making it an environmentally friendly option.
It is important to note that using a different type of battery or a battery with a different voltage can damage the key fob and render it unusable. Therefore, it is recommended to use only the CR2032 battery for the 2017 Jeep Renegade key fob.
Replacing the battery is a simple process that can be done at home. However, it is important to ensure that the battery is inserted correctly, with the positive (+) side facing up. If the battery is inserted incorrectly, it can damage the key fob.
Overall, the CR2032 battery is a reliable and long-lasting power source for the 2017 Jeep Renegade key fob. It is readily available at most electronic stores and online retailers, making it easy to replace when needed.
Battery Replacement Procedure
To replace the battery in the key fob of a 2017 Jeep Renegade, the following tools will be needed:
- CR2032 coin battery
- Flathead screwdriver
Follow these simple steps to replace the battery in your 2017 Jeep Renegade key fob:
- Locate the metal switch on the opposite end of the buttons on the key fob. Push and hold the switch to unlock the key from the key fob. Pull out the key to detach it.
- Use a flathead screwdriver to gently pry open the key fob. Be careful not to damage the plastic casing.
- Locate the battery compartment and remove the old battery. Take note of the orientation of the battery before removing it.
- Insert the new CR2032 coin battery into the battery compartment with the positive (+) side facing up.
- Carefully snap the two halves of the key fob back together. Make sure the plastic casing is securely fastened.
- Reinsert the key into the key fob and test the new battery by pressing the buttons.
Replacing the battery in your 2017 Jeep Renegade key fob is a simple and easy process that can be completed in just a few minutes. By following these step-by-step instructions, you can ensure that your key fob is always ready to go when you need it.
When replacing the battery in the key fob of a 2017 Jeep Renegade, there are a few safety precautions that should be taken to ensure that the process is completed safely and without incident.
First and foremost, it is important to ensure that the replacement battery is the correct type and size for the key fob. Using the wrong type or size of battery can result in damage to the key fob or even injury to the person replacing the battery.
It is also important to handle the battery with care, as it can be dangerous if mishandled. Always use gloves when handling the battery to avoid contact with skin oils or other contaminants that can damage the battery or cause it to malfunction.
When removing the old battery from the key fob, be sure to dispose of it properly. Batteries contain hazardous materials and should not be thrown in the trash. Check with local recycling centers or battery retailers for proper disposal methods.
Finally, when replacing the battery in the key fob, be sure to follow the manufacturer’s instructions carefully. Failure to do so can result in damage to the key fob or the vehicle’s electrical system.
By following these safety precautions, replacing the battery in a 2017 Jeep Renegade key fob can be done safely and without incident.
Common Issues and Troubleshooting
Key Fob Not Working
One of the most common issues with the 2017 Jeep Renegade key fob is that it stops working. This can be due to a number of reasons, including a dead battery, worn buttons, poor battery contact, water damage, defective key fob, receiver module issues, signal interference, or an unpaired key requiring reprogramming. If the key fob is not working, the first thing to check is the battery. A dead battery is the leading cause of key fob not working in Renegade.
If the battery is not the issue, it is recommended to check the receiver module and the key fob itself. The receiver module is located in the vehicle, and it receives signals from the key fob. If the module is not working properly, it may not be able to receive signals from the key fob. If the key fob is defective, it may need to be replaced.
Battery Drains Quickly
Another issue that can occur with the key fob is that the battery drains quickly. This can be due to a number of reasons, including leaving the key fob too close to the vehicle, using the key fob too frequently, or a faulty battery. If the battery is draining quickly, it is recommended to replace the battery with a new one.
It is also important to note that the battery in the key fob should be replaced every 2-3 years, even if it is not showing any signs of wear. This will ensure that the key fob continues to work properly and prevent any issues from occurring in the future.
In conclusion, the 2017 Jeep Renegade key fob can experience issues such as not working or draining quickly. These issues can be resolved by checking the battery, receiver module, and the key fob itself. It is recommended to replace the battery every 2-3 years to prevent any future issues from occurring.
Frequently Asked Questions
The following are some frequently asked questions about the key fob battery for the 2017 Jeep Renegade:
How long does the key fob battery last?
The key fob battery for the 2017 Jeep Renegade should last between two and four years, depending on how frequently the key fob is used. If the key fob is used frequently, the battery may need to be replaced sooner. It is important to note that the battery life can be affected by factors such as extreme temperatures, humidity, and the age of the battery.
How do I know if the key fob battery needs to be replaced?
If the key fob is not working properly, it may be an indication that the battery needs to be replaced. Signs that the battery may need to be replaced include the key fob not unlocking or locking the doors, the key fob not starting the vehicle, or the key fob not working at all.
How do I replace the key fob battery?
To replace the key fob battery for the 2017 Jeep Renegade, follow these steps:
- Remove the emergency key from the key fob.
- Insert the emergency key into the slot on the side of the key fob and gently pry the key fob apart.
- Remove the old battery from the key fob.
- Insert the new battery into the key fob with the positive side facing up.
- Snap the key fob back together.
- Test the key fob to ensure that it is working properly.
What type of battery does the key fob use?
The key fob for the 2017 Jeep Renegade uses a CR2032 coin battery. It is important to use the correct type of battery to ensure that the key fob works properly.
Can I replace the key fob battery myself?
Yes, the key fob battery can be replaced easily at home. However, it is important to ensure that the correct type of battery is used and that the battery is inserted correctly. If the key fob is not working properly after the battery has been replaced, it may be necessary to have the key fob reprogrammed by a professional.
Replacing the battery in your 2017 Jeep Renegade key fob is a simple process that can be done in a matter of minutes. With the right tools and a new CR2032 coin battery, you can avoid the inconvenience of a dead key fob and continue to enjoy the convenience of keyless entry and push-button start.
It’s important to note that if you have replaced the battery and are still experiencing issues with your key fob, it may be a sign of a larger problem. In this case, it’s recommended to take your vehicle to a certified Jeep technician for further diagnosis and repair.
Additionally, taking care of your key fob by keeping it clean and avoiding extreme temperatures can help prolong the life of the battery and prevent future issues. It’s also a good idea to keep a spare battery on hand in case of emergencies.
So, replacing the battery in your 2017 Jeep Renegade key fob is a simple and cost-effective way to maintain the functionality of your vehicle’s keyless entry system. By following the steps outlined in this guide and taking proper care of your key fob, you can ensure that your Jeep Renegade remains a reliable and convenient mode of transportation.