If you own a Jeep, you know that the key fob is essential to the vehicle. It allows you to unlock and lock your doors and start the engine remotely. But what do you do when your Jeep key fob stops working?
The most likely culprit is a dead battery. Fortunately, it’s easy to charge a Jeep key fob. In this blog post, I will show you step-by-step instructions on how to charge jeep key fob. By the end, and you’ll know exactly what to do when your Jeep key fob stops working.
So without further ado, let’s get started!
Table of Contents
What Is A Jeep Key Fob?
A Jeep key fob is a small electronic device used to remotely lock and unlock a Jeep vehicle and perform other functions, such as starting the engine. The key fob typically includes buttons for locking and unlocking the doors and a panic button that can be used to sound the car’s alarm in an emergency. Some Jeep key fobs include additional buttons such as opening the trunk or activating the car’s remote start feature.
Can A Key Fob Be Recharged?
Some key fobs can be recharged, but not all of them. It depends on the type of key fob and the vehicle it is used with. Some key fobs use replaceable batteries, while others are rechargeable and can be charged using a USB cable or a special charging dock.
If you have a rechargeable key fob, it is essential to check the owner’s manual or with the manufacturer for information on how to charge it and how often it needs to be charged. You should also be aware that the battery life of the key fob will depend on the usage and on the battery type.
Is There A Key Fob Charger In A Jeep Cherokee?
Like many modern vehicles, the Jeep Cherokee comes with a keyless entry and push-button start system that uses a key fob. Some models of the Jeep Cherokee come with a built-in key fob charger in the vehicle. This charger is typically located in a storage compartment in the vehicle. It allows you to charge the key fob inside the vehicle.
However, not all Jeep Cherokee models have this feature. Some models may require that you charge the key fob using a separate charging device, such as a USB cable or a charging dock.
How Much Is A Jeep Key Fob?
The cost of a Jeep key fob can vary depending on the model of the Jeep and the type of key fob. A new key fob from a Jeep dealership can range from $50 to $300. Prices may vary depending on the Jeep model and the key fob’s features. For example, a key fob for an older Jeep model may be less expensive than a key fob for a newer model with more advanced features.
Another option is to purchase an aftermarket key fob which can be significantly cheaper than buying one from a dealership. However, you should be aware that aftermarket key fobs may have a different quality and functionality than OEM (original equipment manufacturer) key fobs.
It is best to check with your local Jeep dealership or an online retailer for the most up-to-date and accurate pricing for key fobs for your specific Jeep model.
Things To Know About Charging Jeep Key Fob.
- Make sure the key fob is fully charged before you charge it again.
- Do not leave your Jeep key fob or car keys in direct sunlight for extended periods, as this can cause damage to the battery.
- Do not leave your Jeep key fob or car keys in a hot area, as they may overheat and cause them to malfunction when needed.
Necessary Steps To Be Taken While Charging Jeep Key Fob.
Whether you’re charging your Jeep key fob or the battery in your remote control, there are a few steps you’ll want to take.
First, make sure that your vehicle is turned off. If it’s not, turn it off and then back on again.
Next, lock all your doors and ensure no one else can get into the vehicle. This is important because if an adult tries to open the door or get in without a key, they could damage the battery or, worse—the Jeep itself.
Finally, place one hand on the key fob and one hand on the console near where it sits (so it doesn’t fall onto the floor). This will help prevent any accidents while charging!
How To Charge Jeep Key Fob?
- Locate the charging port on your Jeep key fob. This is typically located on the back or bottom of the fob.
- Plug the key fob into a USB charger or a USB port on your computer.
- Leave the critical fob connected to the charger for at least 30 minutes or until the battery is fully charged.
- Once the key fob is fully charged, unplug it from the charger and test the remote to ensure it works properly.
- Charging your key fob once a month or as needed is recommended to ensure the battery remains charged and ready for use.
Some Jeep models may have a built-in charging system that allows you to charge the key fob by placing it in the vehicle’s charging dock. Refer to your owner’s manual for specific instructions on charging your key fob.
How To Start Jeep With Dead Key Fob?
If your Jeep’s key fob battery is dead, you can still start the vehicle by using the mechanical key that is hidden inside the fob. To access the mechanical key, locate the small button or release mechanism on the side or bottom of the fob and press or slide it to release the key. Once the mechanical key is exposed, you can insert it into the door lock or ignition and turn it to start the vehicle.
You can also start with the fob by placing it in the cup holder or the start button. This works in some models of the jeep.
What To Do When The Jeep Key Fob Battery Dies?
When the battery in your Jeep’s key fob dies, you can still start the vehicle by using the mechanical key that is hidden inside the fob. To access the mechanical key, locate the small button or release mechanism on the side or bottom of the fob and press or slide it to release the key. Once the mechanical key is exposed, you can insert it into the door lock or ignition and turn it to start the vehicle.
If you want to replace the battery, you can do it yourself. You will need a replacement battery (usually a CR2032 or CR2025) and a small flathead screwdriver or coin. You can find replacement batteries at most electronics or department stores.
To replace the battery, follow these steps:
- Locate the small button or release mechanism on the side or bottom of the fob and press or slide it to release the key.
- Use a small flathead screwdriver or coin to pry the fob gently.
- Carefully remove the old battery and replace it with the new one, ensuring the positive (+) side of the battery is facing up.
- Reassemble the fob by pressing the halves back together.
- Test the fob by pressing the buttons to ensure it works properly.
It is also a good idea to have a spare key fob or a physical key with you if the battery dies and you cannot start your jeep.
What Are Some Tips For Charging A Jeep Key Fob Faster?
There are a few tips you can use to charge your Jeep key fob faster:
Use a higher-amp charger
Using a charger with a higher amperage rating will allow your key fob to charge faster. You can use a USB charger with a higher amperage rating or a wall charger.
Use a wall outlet
Charging your key fob through a wall outlet will charge it faster than charging it through a USB port on your computer or laptop.
Remove the key fob from the keychain
Removing it from the keychain will allow it to charge faster, as it will have more direct contact with the charging surface.
Keep the key fob cool
Keeping it in a cool place will allow it to charge faster. Avoid charging it in direct sunlight or a hot car.
Keep an eye on the battery level
Keep an eye on the battery level of your key fob and charge it before it reaches a low level. Charging a partially drained battery will take less time than charging a completely drained one.
How To Charge Jeep Compass Key Fob?
To charge the key fob for a Jeep Compass, you must first locate the charging port on the key fob. This is typically located on the back or bottom of the key fob. Once you have located the charging port, you can connect the key fob to a charging cable or dock.
The key fob should begin charging automatically and typically takes a few hours to charge fully. It’s important to note that some key fobs may have a battery indicator light or display showing the charging status. It’s also good to refer to your vehicle’s owner’s manual for specific instructions on charging your key fob.
How To Charge Jeep Grand Cherokee Key Fob?
The Jeep Grand Cherokee key fob typically uses a CR2032 coin cell battery. To charge the key fob, you will need to follow these steps:
- Locate the release button on the back of the key fob. This button is typically located near the bottom of the key fob and is used to release the key fob from the key ring.
- Press the release button to separate the key fob from the key ring.
- Remove the battery compartment cover on the back of the key fob. This cover is typically held in place by a small clip or spring.
- Replace the battery with a new CR2032 coin cell battery, ensuring that the battery’s positive side is facing up.
- Replace the battery compartment cover and press the key fob back together.
- Test the key fob to ensure it is working correctly.
Some newer models of the Jeep Grand Cherokee come with a rechargeable key fob that can be charged by plugging it into a USB port. Consult your vehicle manual for specific instructions on charging your key fob.
How To Charge Jeep Renegade Key Fob?
Jeep Renegade key fob typically does not need to be charged, as it runs on a small battery. If the key fob is not functioning properly, the battery may be low and needs to be replaced.
To replace the battery, you will need to remove the key fob from the key ring and locate the small release button or switch on the back of the key fob. Press or slide the release button to open the key fob and remove the old battery.
Replace it with a new battery of the same type, making sure to observe the proper polarity, and then close the key fob. Suppose the key fob is still not working. In that case, you can check your vehicle manual for more details on troubleshooting or contact the dealership for further assistance.
Hopefully, we’ve covered everything you need about your Jeep key fob, including how to charge it. If you have further questions, don’t hesitate to post them in the comments.